Pengembangan industri pengolahan sagu skala rumah tangga di Kabupaten Teluk Wondama Provinsi Papua Barat
Development of home industry sago processing in Teluk Wondama Regency, West Papua Province
DOI:
https://doi.org/10.46549/igkojei.v4i2.384Keywords:
Home industry, Sago processing machine, Teluk wondama, Sago rasping machine, Industri rumah tangga, Mesin pengolahan sagu, Pemarut saguAbstract
ABSTRACT
Development of small scale of sago processing based on community in West Papua Province has a bright prospect because it is supported by abundant sago palm resources as row material. Teluk Wondama is one of the regency in West Papua Province which has high potential of sago, unfortunately the potency have not utilized optimally. The ovjective of this program was to develop home industry sago processing in Distric Rasiei, Teluk Wondama Regency by application of mechanical sago processing machines. The methods used were introducing mechanical sago processing equipment followed by partner training and assistance to operate the machines for sago starch production. The results had been achieved from this program were (1) partner have new asset i.e. a set of sago processing equipment which consists of sago rasping machine variant-01 and stirrer rotary blade type of sago starch extraction machine, as well as supporting components such as starch sedimentation tank and water pump (2) partner have already changed their method in sago processing, from traditional method to mechanical one, (3) partner were able to operate the machine easily without any difficulties. During training and assistance, the machine was work properly and there was no technical constrains (4) fresh sago starch production capacity increase from 352 kg/week to 2.112 kg/week.
Keywords: Home industry; Sago processing machine; Sago rasping machine; Teluk wondama
ABSTRAK
Papua Barat memiliki prospek yang cerah karena didukung bahan baku yang melimpah berupa sumberdaya sagu. Teluk Wondama merupakan salah satu kabupaten di Papua barat dengan potensi sagu yang tinggi namun belum dimanfaatkan secara optimal. Tujuan dari program ini adalah untuk mengembangkan pengolahan sagu skala industri rumah tangga melalui penerapan mesin pengolahan mekanis di Distrik Rasiei, Kabupaten Teluk Wondama. Metode yang digunakan adalah mengintroduksi peralatan pengolahan sagu mekanis diikuti dengan pelatihan dan pendampingan mitra dalam pengoperasian mesin untuk produksi sagu. Hasil yang dicapai adalah (1) mitra memiliki asset baru berupa 1 paket mesin pengolahan sagu yang terdiri dari mesin parut sagu tipe silinder variant-01 dan mesin ekstraksi pati sagu tipe stirrer rotary blade beserta bagian pendukung berupa bak pengendapan pati dan pompa air, (2) mitra telah merubah metode pengolahan sagu dari cara tradisional ke mekanis, (3) mitra telah terampil mengoperasikan mesin-mesin pengolahan yang diintroduksi dan selama kegiatan berlangsung mesin berfungsi dengan baik tanpa kendala teknis, (4) kapasitas produksi pati sagu meningkat dari 352 kg/minggu menjadi 2.112 kg/minggu.
Kata kunci: Industri rumah tangga; Mesin pengolahan sagu; Pemarut sagu; Teluk wondama
Downloads
References
Alua, I. Darma dan Lisangan MM. 2021. Uji lapang dan analisis kelayakan ekonomi mesin parut dan ekstraksi pati sagu produksi Fateta Unipa. Jurnal Igya Ser Hanjop, 3(1); 25-35. https://doi.org/10.47039/ish.3.2021.25-35
Badan Perencanaan Pembangunan Daerah Kabupaten Teluk Bintuni. 2016. Kajian Pengembangan Pabrik Sagu di Distrik Tomu. Laporan Akhir Bapeda Teluk Bintuni. Bintuni.
Darma, 2011. Traditional processing of sago in Papua in: Prooceedings of the 10th International Sago Symposium: Sago for food security, Bio-energy, and Industry From Research to Market, Bogor: 29-31 October 2011. Hal. 115.
Darma, Wang X. dan Kito K. 2014a. Development of cylinder type sago rasper for improving rasping performance. International Agricultural Engineering Journal (IAEJ), 23(1); 31-40.
Darma, Wang X, dan Kito K. 2014b. Development of Sago Starch Extractor with Stirrer Rotary Blade forImproving Extraction Performance. International Journal of Engineering and Technology (IJET), 6(5); 2472-2481.
Darma, Santoso B. dan Reniana. 2017. Development of cylinder type sago rasping machine using sharp teeth. International Journal of Engineering and Technology (IJET-IJENS), 17(1); 1-7.
Darma, 2018. Improvement of sago processing machiney. in: SAGO PALM: Multiple Contribution to Food Security and Sustainable Livelyhoods (Eds: Ehara, H., Y. Toyoda and D.V. Johnson). Springer. Singapore.
Darma, Santoso B, Reniana dan Arbianto M. A. 2020. Kinerja teknologi mesin pengolahan sagu skala kecil di Kabupaten Supiori, Provinsi Papua. Jurnal Pengkajian dan Pengembangan Teknologi Pertanian, 23(2); 163-176.
Darma, Edowai DN, Situngkir RU, Reniana, Malina AC, Massi M, Laga A dan Azis A. 2022. Program kosabangsa pada masyarakat kelompok tani sagu di Distrik Masni, Kabupaten Manokwari, Provinsi Papua Barat. In: Prosiding Seminar Nasional Hasil Pengabdian 2022. LP2M Universitas Negeri Makassar, 26 November hal:1105-1111.
Flach, M. 1997. Sago Palm. Metroxylon sagu Rottb. International Plant Genetic Resources Institute (IBPGR). Rome.
Haryanto, B. Mubekti dan Putranto AT. 2015. Potensi dan Pemanfaatan Pati Sagu dalam Mendukung Ketahanan Pangan di Kabupaten Sorong Selatan Papua Barat. Jurnal Pangan, (24)2; 97-106.
Mangallo, B. Darma dan Dedi S. 2021. Pengolahan sagu berbasis zero waste di Kabupaten Manokwari. Jurnal Panrita Abdi, 6(2); 315-323.
Paulinus, K. 2005. Studi pengolahan sagu secara tradisional di Kabupaten Merauke Papua. Manokwari. Skripsi Fakultas Pertanian UNIPA.
Reniana, Darma dan Kurniawan A. 2017. Prototipe mesin parut empulur sagu bertenaga motor bakar. Jurnal Teknik Pertanian Lampung, 6(2); 89-94. https://doi.org/10.30862/agt.v2i3.483
Sauggay, R. 2019. Studi pengolahan sagu (Metroxylon sp) secara mekanis di kampung Warbefondi Distrik Supiori Selatan Kabupaten Supiori Provinsi Papua. Manokwari. Skripsi Fakultas Teknologi Pertanian UNIPA.
Singhal, RS, Kennedy JF, Gopalakrishnan SM, Kaczmarek A, Knill CJ dan Akmar PF. 2008. Industrial production-processing, and utilization of sago palm-derived products. Science Direct Carbohydrate Polymers, 7(2); 1-20. Elsevier. https://doi.org/10.1016/j.carbpol.2007.07.043
Worabay, T. 2010. Pengembangan desain dan evaluasi kinerja mesin parut sagu (Metroxylon sp) tipe silinder bertenaga motor bakar. Manokwari. Skripsi Fakultas Teknologi Pertanian UNIPA.

Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Darma, Reniana, Budi Santoso, Bertha Mangallo

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
License and Copyright Agreement
In submitting the manuscript to the journal, the authors certify that:
- They are authorized by their co-authors to enter into these arrangements.
- The work described has not been formally published before, except in the form of an abstract or as part of a published lecture, review, thesis, or overlay journal. Please also carefully read IGKOJEI: Jurnal Pengabdian Masyarakat Posting Your Article Policy at https://journal.fapetunipa.ac.id/index.php/igkojei/policy/publicationethics
- That it is not under consideration for publication elsewhere,
- That its publication has been approved by all the author(s) and by the responsible authorities – tacitly or explicitly – of the institutes where the work has been carried out.
- They secure the right to reproduce any material that has already been published or copyrighted elsewhere.
- They agree to the following license and copyright agreement.
Copyright
Authors who publish withIGKOJEI: Jurnal Pengabdian Masyarakat agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-NC-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.